| |
|
|
Chaos Blue
{Alligator Blue Balance Line - Jaw } {13 bar
smoothed average offset 8 bars }
Ref(Wilders(MP(),13),-8);
|
Chaos Red
{Alligator Red Balance Line - Teeth} {8 bar
smoothed average offset 5 bars}
Ref(Wilders(MP(),8),-5);
|
Chaos Green
{Alligator Green Balance Line - Lip } {5 bar
smoothed average offset 3 bars }
Ref(Wilders(MP(),5),-3);
|
Chaos Gator
{ Chaos Alligator } { Plot as histogram }
green := Fml("Chaos Green"); red :=
Fml("Chaos Red"); blue := Fml("Chaos Blue");
If(green > red AND red > blue, green - blue,
If(blue > red AND red > green, green - blue, 0));
|
Chaos AO
{ Chaos Awsome Oscillator - measures momentum } ( A very close
approximation of MFI } { Plot as histogram }
Mov(MP(),5,S) - Mov(MP(),34,S);
|
Chaos AO Signal
Line
{ Chaos Awsome Oscillator Signal Line } {
Plot as line over AO histogram }
Mov(Mov(MP(),5,S) - Mov(MP(),34,S),5,S)
|
Chaos AC
{ Chaos Accelerator/Decelerator Oscillator } { Measures
acceleration } { Plot as histogram }
Fml("Chaos AO") - Mov(Fml("Chaos AO"),5,S);
|
Chaos Fractal
{ Chaos Fractal (simple version +1=Up, -1=Dn)
}
High1 := Ref(HIGH,-2); High2 :=
Ref(HIGH,-1); High3 := Ref(HIGH,0); High4 := Ref(HIGH,1);
High5 := Ref(HIGH,2); Low1 := Ref(LOW,-2); Low2 :=
Ref(LOW,-1); Low3 := Ref(LOW,0); Low4 := Ref(LOW,1);
Low5 := Ref(LOW,2); Fractal := If((High3 > High1) AND
(High3 > High2) AND(High3 > High4) AND (High3 > High5),
+1,0);
Fractal := If((Low3 < Low1) AND (Low3 <
Low2) AND(Low3 < Low4) AND (Low3 < Low5), If(Fractal >
0, 0, -1), Fractal);
Fractal;
|
|
 |
 |
|
Adaptive Trends And Oscillators by John Ehlers
|
H cycle count
1a
value:= Fml("Hilbert cycle period - 1a");
If(Sum(value,6)>=360 AND Sum(value,5)<360 ,6,0) +
If(Sum(value,7)>=360 AND Sum(value,6)<360 ,7,0) +
If(Sum(value,8)>=360 AND Sum(value,7)<360 ,8,0) +
If(Sum(value,9)>=360 AND Sum(value,8)<360 ,9,0) +
If(Sum(value,10)>=360 AND Sum(value,9)<360 ,10,0) +
If(Sum(value,11)>=360 AND Sum(value,10)<360 ,11,0) +
If(Sum(value,12)>=360 AND Sum(value,11)<360 ,12,0) +
If(Sum(value,13)>=360 AND Sum(value,12)<360 ,13,0) +
If(Sum(value,14)>=360 AND Sum(value,13)<360 ,14,0) +
If(Sum(value,15)>=360 AND Sum(value,14)<360 ,15,0)
|
H cycle count
2a
value:= Fml("Hilbert cycle period - 1a");
If(Sum(value,16)>=360 AND Sum(value,15)<360 ,16,0) +
If(Sum(value,17)>=360 AND Sum(value,16)<360 ,17,0) +
If(Sum(value,18)>=360 AND Sum(value,17)<360 ,18,0) +
If(Sum(value,19)>=360 AND Sum(value,18)<360 ,19,0) +
If(Sum(value,20)>=360 AND Sum(value,19)<360 ,20,0) +
If(Sum(value,21)>=360 AND Sum(value,20)<360 ,21,0) +
If(Sum(value,22)>=360 AND Sum(value,21)<360 ,22,0) +
If(Sum(value,23)>=360 AND Sum(value,22)<360 ,23,0) +
If(Sum(value,24)>=360 AND Sum(value,23)<360 ,24,0) +
If(Sum(value,25)>=360 AND Sum(value,24)<360 ,25,0)
|
H cycle count
3a
value:= Fml("Hilbert cycle period - 1a");
If(Sum(value,26)>=360 AND Sum(value,25)<360 ,26,0) +
If(Sum(value,27)>=360 AND Sum(value,26)<360 ,27,0) +
If(Sum(value,28)>=360 AND Sum(value,27)<360 ,28,0) +
If(Sum(value,29)>=360 AND Sum(value,28)<360 ,29,0) +
If(Sum(value,30)>=360 AND Sum(value,29)<360 ,30,0) +
If(Sum(value,31)>=360 AND Sum(value,30)<360 ,31,0) +
If(Sum(value,32)>=360 AND Sum(value,31)<360 ,32,0) +
If(Sum(value,33)>=360 AND Sum(value,32)<360 ,33,0) +
If(Sum(value,34)>=360 AND Sum(value,33)<360 ,34,0) +
If(Sum(value,35)>=360 AND Sum(value,34)<360 ,35,0)
|
H ip sum 1
pd:=Int(Fml("Hilbert cycle period - final-a"));
pr:=(H+L)/2; (Cos(0)*pr)+ (Cos(360*(1/pd))*Ref(pr,-1))+
(Cos(360*(2/pd))*Ref(pr,-2))+ (Cos(360*(3/pd))*Ref(pr,-3))+
(Cos(360*(4/pd))*Ref(pr,-4))+ (Cos(360*(5/pd))*Ref(pr,-5))+
If(pd>6, Cos(360*(6/pd))*Ref(pr,-6), 0)+ If(pd>7,
Cos(360*(7/pd))*Ref(pr,-7), 0)+ If(pd>8,
Cos(360*(8/pd))*Ref(pr,-8), 0)+ If(pd>9,
Cos(360*(9/pd))*Ref(pr,-9), 0)+ If(pd>10,
Cos(360*(10/pd))*Ref(pr,-10), 0)+ If(pd>11,
Cos(360*(11/pd))*Ref(pr,-11), 0)+ If(pd>12,
Cos(360*(12/pd))*Ref(pr,-12), 0)+ If(pd>13,
Cos(360*(13/pd))*Ref(pr,-13), 0)+ If(pd>14,
Cos(360*(14/pd))*Ref(pr,-14), 0)
|
H ip sum 2
pd:=Int(Fml("Hilbert cycle period -
final-a")); pr:=(H+L)/2; If(pd>15,
Cos(360*(15/pd))*Ref(pr,-15), 0)+ If(pd>16,
Cos(360*(16/pd))*Ref(pr,-16), 0)+ If(pd>17,
Cos(360*(17/pd))*Ref(pr,-17), 0)+ If(pd>18,
Cos(360*(18/pd))*Ref(pr,-18), 0)+ If(pd>19,
Cos(360*(19/pd))*Ref(pr,-19), 0)+ If(pd>20,
Cos(360*(20/pd))*Ref(pr,-20), 0)+ If(pd>21,
Cos(360*(21/pd))*Ref(pr,-21), 0)+ If(pd>22,
Cos(360*(22/pd))*Ref(pr,-22), 0)+ If(pd>23,
Cos(360*(23/pd))*Ref(pr,-23), 0)+ If(pd>24,
Cos(360*(24/pd))*Ref(pr,-24), 0)
|
H ip sum 3
pd:=Int(Fml("Hilbert cycle period - final-a"));
pr:=(H+L)/2; If(pd>25, Cos(360*(25/pd))*Ref(pr,-25), 0)+
If(pd>26, Cos(360*(26/pd))*Ref(pr,-26), 0)+ If(pd>27,
Cos(360*(27/pd))*Ref(pr,-27), 0)+ If(pd>28,
Cos(360*(28/pd))*Ref(pr,-28), 0)+ If(pd>29,
Cos(360*(29/pd))*Ref(pr,-29), 0)+ If(pd>30,
Cos(360*(30/pd))*Ref(pr,-30), 0)+ If(pd>31,
Cos(360*(31/pd))*Ref(pr,-31), 0)+ If(pd>32,
Cos(360*(32/pd))*Ref(pr,-32), 0)+ If(pd>33,
Cos(360*(33/pd))*Ref(pr,-33), 0)+ If(pd>34,
Cos(360*(34/pd))*Ref(pr,-34), 0)
|
H rp sum 1
pd:=Int(Fml("Hilbert cycle period - final-a"));
pr:=(H+L)/2; (Sin(0)*pr)+ (Sin(360*(1/pd))*Ref(pr,-1))+
(Sin(360*(2/pd))*Ref(pr,-2))+ (Sin(360*(3/pd))*Ref(pr,-3))+
(Sin(360*(4/pd))*Ref(pr,-4))+ (Sin(360*(5/pd))*Ref(pr,-5))+
If(pd>6, Sin(360*(6/pd))*Ref(pr,-6), 0)+ If(pd>7,
Sin(360*(7/pd))*Ref(pr,-7), 0)+ If(pd>8,
Sin(360*(8/pd))*Ref(pr,-8), 0)+ If(pd>9,
Sin(360*(9/pd))*Ref(pr,-9), 0)+ If(pd>10,
Sin(360*(10/pd))*Ref(pr,-10), 0)+ If(pd>11,
Sin(360*(11/pd))*Ref(pr,-11), 0)+ If(pd>12,
Sin(360*(12/pd))*Ref(pr,-12), 0)+ If(pd>13,
Sin(360*(13/pd))*Ref(pr,-13), 0)+ If(pd>14,
Sin(360*(14/pd))*Ref(pr,-14), 0)
|
H rp sum 2
pd:=Int(Fml("Hilbert cycle period - final-a"));
pr:=(H+L)/2; If(pd>15, Sin(360*(15/pd))*Ref(pr,-15), 0)+
If(pd>16, Sin(360*(16/pd))*Ref(pr,-16), 0)+ If(pd>17,
Sin(360*(17/pd))*Ref(pr,-17), 0)+ If(pd>18,
Sin(360*(18/pd))*Ref(pr,-18), 0)+ If(pd>19,
Sin(360*(19/pd))*Ref(pr,-19), 0)+ If(pd>20,
Sin(360*(20/pd))*Ref(pr,-20), 0)+ If(pd>21,
Sin(360*(21/pd))*Ref(pr,-21), 0)+ If(pd>22,
Sin(360*(22/pd))*Ref(pr,-22), 0)+ If(pd>23,
Sin(360*(23/pd))*Ref(pr,-23), 0)+ If(pd>24,
Sin(360*(24/pd))*Ref(pr,-24), 0)
|
H rp sum 3
pd:=Int(Fml("Hilbert cycle period - final-a"));
pr:=(H+L)/2; If(pd>25, Sin(360*(25/pd))*Ref(pr,-25), 0)+
If(pd>26, Sin(360*(26/pd))*Ref(pr,-26), 0)+ If(pd>27,
Sin(360*(27/pd))*Ref(pr,-27), 0)+ If(pd>28,
Sin(360*(28/pd))*Ref(pr,-28), 0)+ If(pd>29,
Sin(360*(29/pd))*Ref(pr,-29), 0)+ If(pd>30,
Sin(360*(30/pd))*Ref(pr,-30), 0)+ If(pd>31,
Sin(360*(31/pd))*Ref(pr,-31), 0)+ If(pd>32,
Sin(360*(32/pd))*Ref(pr,-32), 0)+ If(pd>33,
Sin(360*(33/pd))*Ref(pr,-33), 0)+ If(pd>34,
Sin(360*(34/pd))*Ref(pr,-34), 0)
|
H TL sum 1
value:=Int(Fml("Hilbert cycle period -
final-a")); If(value=6, Mov((H+L)/2,8,S),0) + If(value=7,
Mov((H+L)/2,9,S),0) + If(value=8, Mov((H+L)/2,10,S),0) +
If(value=9, Mov((H+L)/2,11,S),0) + If(value=10,
Mov((H+L)/2,12,S),0) + If(value=11, Mov((H+L)/2,13,S),0) +
If(value=12, Mov((H+L)/2,14,S),0) + If(value=13,
Mov((H+L)/2,15,S),0) + If(value=14, Mov((H+L)/2,16,S),0) +
If(value=15, Mov((H+L)/2,17,S),0)
|
H TL sum 2
value:=Int(Fml("Hilbert cycle period -
final-a")); If(value=16, Mov((H+L)/2,18,S),0) + If(value=17,
Mov((H+L)/2,19,S),0) + If(value=18, Mov((H+L)/2,20,S),0) +
If(value=19, Mov((H+L)/2,21,S),0) + If(value=20,
Mov((H+L)/2,22,S),0) + If(value=21, Mov((H+L)/2,23,S),0) +
If(value=22, Mov((H+L)/2,24,S),0) + If(value=23,
Mov((H+L)/2,25,S),0) + If(value=24, Mov((H+L)/2,26,S),0) +
If(value=25, Mov((H+L)/2,27,S),0)
|
H TL sum 3
value:=Int(Fml("Hilbert cycle period -
final-a")); If(value=26, Mov((H+L)/2,28,S),0) + If(value=27,
Mov((H+L)/2,29,S),0) + If(value=28, Mov((H+L)/2,30,S),0) +
If(value=29, Mov((H+L)/2,31,S),0) + If(value=30,
Mov((H+L)/2,32,S),0) + If(value=31, Mov((H+L)/2,33,S),0) +
If(value=32, Mov((H+L)/2,34,S),0) + If(value=33,
Mov((H+L)/2,35,S),0) + If(value=34, Mov((H+L)/2,36,S),0) +
If(value=35, Mov((H+L)/2,37,S),0)
|
Hilbert cycle period
- 1a
value1:=((H+L)/2) - Ref(((H+L)/2),-6);
value2:= Ref(value1,-3); value3:=0.75*(value1-Ref(value1,-6)) +
0.25*(Ref(value1,-2)-Ref(value1,-4)); inphase:= 0.33 * value2 +
(0.67 * PREV); quad:= 0.2 * value3 + ( 0.8 * PREV);
p1:=Atan(Abs(quad+Ref(quad,-1)),Abs(inphase+Ref(inphase,-1)));
phase:=If(inphase<0 AND quad>0, 180-p1, If(inphase<0 AND quad<0,
180+p1, If(inphase>0 AND quad<0, 360-p1,p1)));
dp:=If(Ref(phase,-1)<90 AND phase>270,
360+Ref(phase,-1)-phase,Ref(phase,-1)-phase); dp2:=If(dp < 1, 1,
If(dp > 60, 60, dp)); dp2
|
Hilbert cycle period
- final-a
c1:=Fml( "H cycle count 1a") + Fml( "H cycle
count 2a") + Fml( "H cycle count 3a") ; c2:=If(c1=0,PREV,c1);
(0.25*c2) + (0.75*PREV)
|
Instantaneous Trend
Line
pr:=(H+L)/2; (Fml("H TL sum 1") + Fml("H TL
sum 2") + Fml("H TL sum 3")); 0.33*(pr + (0.5*(pr-Ref(pr,-3)))) +
(0.67*PREV)
|
Sinewave Indicator
pd:=Int(Fml("Hilbert cycle period - final-a"));
cp:=Fml("Hilbert cycle period - final-a"); ip:=Fml( "H ip sum 1")
+ Fml( "H ip sum 2") + Fml( "H ip sum 3"); rp:=Fml( "H rp sum 1")
+ Fml( "H rp sum 2") + Fml( "H rp sum 3"); dc1:=If(Abs(ip)>0.001,
Atan(rp/ip,1), 90*If(rp>=0,1,-1)); dc2:=If(pd<30 AND
cp>0,dc1+((6.818/cp - 0.227)*360),dc1); dc3:=If(ip<0, dc2+270,
dc2+90); dcp:=If(dc3>315, dc3-360, dc3); Sin(dcp);
Sin(dcp+45)
|
|
 |
 |
|
| |
|